| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Downdraft table question. http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=9711 |
Page 1 of 1 |
| Author: | old man [ Thu Dec 07, 2006 3:24 pm ] |
| Post subject: | |
I'm contemplating buying one of those benchtop downdraft tables, about 20"x40"x6" deep, with a 4" dust port. Do any of you guys (or gals) have one, and does it work well enough to justify it? I'll be using it hooked to the Penn State, 2 hp, 220V collector that draws 1500cfm (without a load, I'm assuming). It's the model DC2000B with 1 micron canister. Ron |
|
| Author: | crazymanmichael [ Thu Dec 07, 2006 3:29 pm ] |
| Post subject: | |
read joewoodworker about the size of duct necessary to capture and remove fine dust. |
|
| Author: | old man [ Fri Dec 08, 2006 12:24 am ] |
| Post subject: | |
I'll check it out, Michael, thanks. Ron |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|